M8 X 110 GALV CHEMICAL RESIN ANCHOR STUD & SETTING TOOL

A Hot Dip Galvanised Chemical Anchor Stud for use with Glass Spin In Capsules or Injection Resin Cartridges, supplied complete with nut and washer. The studs have external hexagon drive units with one drive unit in each box. Each stud has a depth mark to indicate correct setting depth and a chisel point to facilitate appropriate mixing when using glass spin in capsules.

Thread Diameter:  M8
Length:  110mm
Maximum Fixture Thickness:  18mm
Minimum Hole Depth:  80mm

There are no downloads for this product.